Aquarium planner › Guides › 10 gallon tank dimensions
10 gallon tank dimensions: size, weight and what it really holds
Short answer
A standard 10 gallon aquarium measures 20¼ × 10½ × 12 9⁄16 in outside (length × width × height), or 51.4 × 26.7 × 31.9 cm. It weighs 11 lb empty and about 111 lb filled.
- Set up with 2 in of gravel and the water an inch below the rim, it holds about 8.0–8.8 gallons, not 10.
- For a 2 in bed: about 24 lb of sand or 26 lb of gravel.
- The stand top needs at least 20¼ × 10½ in and a rating above 111 lb.
The 10 gallon is the smallest of the classic US glass tanks most people start with, and the one most often set on furniture that was never meant to hold it. The dimensions below are the manufacturer's, measured outside the frame. The rest of the page turns them into the numbers you need before you buy: how much water you will really have, what it weighs, how much substrate to get and what it needs to stand on.
10 gallon tank specifications
| Outside length × width × height | 20¼ × 10½ × 12 9⁄16 in51.4 × 26.7 × 31.9 cm · Aqueon 10 Leader, measured outside the frame |
|---|---|
| Length | 20¼ in (1 ft 8¼ in)51 cm |
| Footprint (stand top needed) | 20¼ × 10½ in213 in², 1.5 ft² |
| Inside dimensions | Not publishedmeasure glass to glass for an exact volume |
| Label volume | 10 US gal38 L |
| Outside box volume | 11.6 galcalculated: L × W × H ÷ 231 |
| Water it holds, set up | 8.0–8.8 gal1 in below the rim, 2 in substrate; lower figure with ¼ in glass (illustration) |
| Empty weight | 11 lbcatalog |
| Filled weight | 111 lb50 kg · catalog; varies with substrate and decor |
| Load on its footprint | 75 lb/ft²calculated: filled weight ÷ footprint |
| Sand for 1 / 2 / 3 in | 12 / 24 / 36 lbdry sand 1,555 kg/m³, outside floor |
| Gravel for 2 in | 26 lb2 × 20 lb bags · aquasoil: 7.0 L |
| 25% water change | 2.0 gal1 trip with a 5 gal bucket, from the lower water figure |
Source: Aqueon aquarium catalog, p. 66.
Do other brands' 10 gallon tanks match?
| Maker and source | Outside L × W × H | Against Aqueon |
|---|---|---|
| Aqueon 10 LeaderAqueon catalog, p. 66 | 20¼ × 10½ × 12 9⁄16 in | reference |
| TetraComplete LED Aquarium Kit, 10 gal | 20 × 10 × 12 inpublished as approximate | L −¼ inW −½ in · H −9⁄16 in |
Close, but not to the fraction. Tetra's own page gives its 10 gallon as approximately 20 × 10 × 12 in. Against Aqueon's published size that is length −¼ in, depth −½ in, height −9⁄16 in. Tetra calls its figures approximate; Aqueon prints fractions. For a lid, a cabinet shelf or a background, the half inch of width is what decides the fit, so measure the tank you actually own before you buy anything cut to size.
How big is a 10 gallon tank?
About 20 inches long, 10½ inches front to back and 12½ inches tall: 1 ft 8¼ in long, small enough for a desk or a sturdy shelf as long as it is rated for the weight below. Its footprint is 213 in² (1.5 ft²). It is the only common size that is just 10½ inches deep; the 15 gallon and the 20 gallon high step up to a 24¼ × 12½ in floor, and the 20 gallon long to 30¼ × 12½ in. See 20 gallon tank dimensions for both twenties.
How many gallons does it actually hold?
The outside box is 11.6 gallons, but that includes the glass. Fill it to an inch below the rim over 2 inches of gravel and there is room for at most 8.8 gallons; with ¼ in glass on all sides, about 8.0 gallons, or 80% of the label. Small tanks lose the largest share, because one inch of rim and two of gravel are a big slice of a 12½ inch tank.
That matters most for anything dosed by volume: conditioner, fertiliser and medication. Dosing a tank like this for “10 gallons” gives roughly a quarter more than intended. The arithmetic for any tank is in how many gallons your tank really holds.

How much does a 10 gallon tank weigh?
Filled, it is 111 lb (50 kg) in the catalog; empty, just 11 lb. The full 10 gallons of water alone would be 83 lb. Spread over its small base, the filled tank puts 75 lb on each square foot, the lowest load of any standard size from 10 gallons up (fish tank weight by size ranks them all).
How much gravel for a 10 gallon tank?
Substrate follows the floor, not the gallons. On the 10 gallon's 20¼ × 10½ in base, a 2 in bed is about 24 lb of sand or 26 lb of gravel, roughly 60% more than a 5.5 gallon needs (15 lb of sand) and a bit over half of a 20 long (42 lb). The figures use the outside floor, so they lean slightly high; the substrate calculator takes your own depth and bag size.
What stand does a 10 gallon need?
The catalog says a tank must sit on an appropriately sized stand designed for its weight. For this size that means a level top of at least 20¼ × 10½ in with nothing overhanging, rated for more than 111 lb plus whatever else you put on it. If you use furniture instead, check its rated load first.
Open the 10 gallon in the free planner
Free and no sign-up. Add your gravel depth and it shows how far below 10 gallons your water really is.
Sources
Dimensions and weights: Aqueon aquarium catalog, p. 66, read 28 October 2026. Second maker: Tetra's own product page (linked in the table above), read 28 October 2026. Densities: Engineering ToolBox (sand, gravel) and USGS (water). Everything else is arithmetic with the same code as the Finpado tools (method).